Copying
This section describes how to load originals and copy them to plain paper.
-
Open the paper support (A) and paper support extension (B).
-
Pull out the paper output tray (C) and open the output tray extension (D).
-
Load paper vertically WITH THE PRINT SIDE FACING UP.
-
Align the paper guides (E) with the paper width.
After loading paper on the rear tray, the paper information registration screen for the rear tray is displayed on the LCD.
-
Press the OK button.
-
Use the button to select the size of the loaded paper on the rear tray, then press the OK button.
Note
-
The asterisk "" will appear with the current page size and media type settings.
-
-
Use the button to select the type of the loaded paper on the rear tray, then press the OK button.
-
Press the COPY button (F).
-
Open the document cover (G).
-
Load the original WITH THE SIDE TO COPY FACING DOWN and align it with the alignment mark (H).
Note
-
To copy two or more documents continuously, load them in the ADF (Auto Document Feeder).
-
-
Close the document cover gently.
-
Confirm the paper settings, then press the Black button or Color button (I).
Important
-
Do not open the document cover until copying is complete.
Note
-
Your printer is equipped with many other convenient copy features.